Pair
I have trouble pairing my camera with the Live-view RC watch.
Check and perform the following actions:
The network data of your camera is switched on (please refer to
O
O
page
47).
You have selected WATCH in the camera's Pairing mode.
O
O
Follow the steps below to reconnect your watch with your camera.
O
O
1. On your camera:
a. Press
b. Press
c. Press
2. On your Live-view RC watch:
a. Press MODE/SLEEP to switch to viewfinder mode. Then, press and hold SET to
display the SET menu.
b. Press NEXT repeatedly to display the Pairing screen, and then press VIDEO.
c. Press VIDEO to break current pairing.
d. Press VIDEO again to start a new pairing.
> the Settings mode > press
> SETUP > press
> CONNECT > press
59
.
.
.
"Network" on