Pair - BenQ QC1 User Manual

3. Use VIDEO or PHOTO to adjust the value, set time format or color of the clock
display.
4. Press SET to apply changes and exit the date/time setting screen.

Pair

The network data of your camera is turned on by default. If the data is turned off, please refer
to "Network" on page 47
1. Press > the Pairing mode > press
2. Press > WATCH > press
Your camera and watch are already paired from the factory. If pairing does not start after
switching camera pairing to watch or if you wish to pair a new watch, proceed with the
following steps.
A. On your camera
1. Press > the Settings mode > press
2. Press > SETUP > press
3. Press > CONNECT > press
to enable network data transmission before pairing.
.
.
.
.
. The camera is ready for pairing.
35
: Press repeatedly to go through options.
TIP
: Press to confirm selection.