Kenwood KCD-BT6544U/UY Service Manual page 17

■ Backup current measurement
Procedure
While ACC OFF (Back Up ON), Reset
■ Switching of Preout
Procedure
Press and hold [TEL/TI/AUTO] key in the Standby source
■ Clearing of CD mechanism information, Service information, DC offset error information, BT memory
information, and FAVORITE registration information. (Clear the data recorded in FLASH MEMORY of
E2PROM and BT module)
Status
Resetting while [TEL/TI/AUTO] + [FAV]
is being pressed
While "– – – –" is displayed, power can be ON. This mode is cancelled by resetting. (The last screen will not be retained.)
Data to be cleared is shown below.
Information to be cleared
CD mechanism error log display
Displays CD loading error data
CD mechanism informa-
Displays CD EJECT error data
tion
Displays CD time code count error data (missing count)
Displays CD time code count error data (count not updated)
Power ON time display
CD operation time display
Service Information CD EJECT times display
PANEL open/close times display
Forced Power OFF information display
DC offset error 1 display (Provides information on whether there is an improper
DC offset error informa-
connection or another error)
tion
DC offset error 2 display (Provides information on the number of capacitor leaks)
Pairing information
Preset phone number information
BT memory information
Friendly name (Setting)
PIN code
FAVORITE registration FAVORITE registration information (Registration list)
information * Total 10 items
TEST MODE
MUTE terminal is OFF after 2 seconds, not after 15 seconds.
(During this time, the CD mechanism does not function.)
Switching PREOUT (1 Preout / 2 Preout model)
Display
C D O
C D X
Details of information
KDC-BT6544U/BT6544UY
/BT7043U/BT742U
Note
Note
Description
At normal termination
At abnormal termination
Data recorded in
E2PROM
E2PROM
E2PROM
E2PROM
E2PROM
E2PROM
E2PROM
E2PROM
E2PROM
E2PROM
E2PROM
E2PROM
FLASH memory in BT module
E2PROM
FLASH memory in BT module
FLASH memory in BT module
E2PROM
17