Table of Contents
Advertisement
■ Test mode specifi cations in CD source
Display mode default: P-Time
• Procedure in CD-DA media (KTD-02A)
Key
Track up procedure
Track down procedure
Jump operation and
FAV
Mechanism version
display
TEL/TI/
Jump operation
AUTO
• Jump operation and Mechanism version display (Sub-mode)
* When operating the jump operation of the track while the mechanism information in this sub-mode, the track number is dis-
played for the specifi c period of time (prior to any other information) and then the mechanism information is displayed again.
Key
FM
Jump operation
AM
Jump operation
Information display
Mechanism μ-com
version
Information display
FAV
Mechanism servo
version
Information display
Mechanism boot
program version
TEL/TI/
Jump operation
AUTO
• Operations with the compressed media
Key
File format display (MP3)
File format display (WMA)
File format display (AAC)
TEST MODE
Display
Jump operation and Mechanism version
display (Sub-mode)
Jump operation
* Toggling of jumping between tracks No. 9
and No. 22 (No.9 ↔ No.22)
Display
This operation is operational only in the "Jump
operation and Mechanism version display" during
CD source.
This operation is operational only in the "Jump
operation and Mechanism version display" during
CD source.
9
B
3
0 :
S
E
R
V :
B
O
O
T :
This operation is operational only in the "Jump
operation and Mechanism version display" during
CD source.
Display
M
P
3
W
M
A
A
A
C
KDC-BT6544U/BT6544UY
/BT7043U/BT742U
Description
Every time pressed, jumps to the track shown below.
No.9 → No.15 → No.10 → No.11 → No.12 → No.13 → No.22
→ No.14 → No.9 (recursive)
But in case the disc has 8 tracks or less, playback starts with
track No.1. (For both CD-DA and compressed fi le discs)
Goes down by 1 track from the currently played track.
* Refer to "Jump operation and Mechanism version display" for
contents and operation of the display.
Jump to No. 9 when the track of No. 22 is being played back.
Jump to No. 22 when the track of No. 9 is being played back.
Description
Jump to No. 28. (Scratch 0.7mm for MUSIC line vibration
testing)
Jump to No. 14. (Disc whose surface is not perfectly fl at:
TCD-731RA Tr14)
Display of Mechanism model name and Mechanism ver-
sion (Pressing the key while the indication in the left cell
is shown is to change to the mechanism servo version
display.)
Mechanism servo table version display (Pressing the key
while the indication in the left cell is shown is to change
to the mechanism boot program version display.)
Mechanism boot program version display (Pressing the
key while the indication in the left cell is shown is to
change to the normal display.)
Jump to No.15.
Set the volume value to 25. (For 20Hz 0dB DC protection
error operation FCT checking)
Description
Display fi le format just before the start of fi le play
back.
15
Advertisement
Table of Contents
