Important Safety Instructions For Use Of The Cordless Impact Wrench; Important Safety Instructions For Battery Charger - Hitachi WH 8D2 Instruction Manual And Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS
FOR USE OF THE CORDLESS IMPACT WRENCH
WARNING:
!
1. Never use this driver handle for any application other than those in this manual.
2. When working in high places, always make sure that there is no one below before
starting to work.
3. Always wear eye and ear protection when you work.
4. Confirm whether the socket has any crack in it.
5. Attach the hex. socket securely onto the anvil. If the hex. soket is insufficiently
secured, it may drop out and cause an accident. For hex. socket attachment refer
to ''PRIOR TO OPERATION'' on page 19.
6. Confirm the tightening torque by a torque wrenck before use in order to ascertain
the correct tightening torque to be used.
7. If a universal joint is used, be sure not to operate the unit in a no-load condition.
Operating in this condition is dangerous. When the socket section spins around
it may cause injury to hands or bodies, or the resuluting intense vibration may
cause the user to drop the tool.
8. Be careful that foreign matters do not block the holes located on both sides of the
handle. Also do not close the holes with a tape. The holes act an important role.
IMPORTANT SAFETY INSTRUC-
TIONS FOR BATTERY CHARGER
1. This manual contains important safety and operating instructions for battery
charger Model UC 12Y.
2. Before using battery charger, read all instructions and cautionary markings on
(1) battery charger, (2) battery, and (3) product using battery.
3. To reduce risk of injury, charge HITACHI rechargeable batteries type EB7, EB9,
EB12, EB2, B-2, B-3 or B-4. Other type of batteries may burst causing personal
injury and damage.
4. Do not expose battery charger to rain or snow.
5. Use of an attachment not recommended or sold by the battery charger manufac-
turer may result in a risk of fire, electric shock, or injury to persons.
6. To reduce risk of damage to electric plug and cord, pull by plug when disconnect-
ing battery charger.
7. Make sure cord is located so that it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
Death or serious bodily injury could result from improper or
unsafe use of the cordless impact wrench. To avoid these
risks, follow these basic safety instructions:
7