Advertisement
MOUNTING THE BIKE
1
ROLLER TENSION KNOB
First loosen roller tension knob to create space for tire. Next loosen lock
ring and turn left tensioning knob to center bike
3
Tighten right tensioning knob on quick release side of trainer until
wheel is firmly centered on resistance unit roller
5
Turn roller tension knob until roller touches tire, then add 2 to 5 full turns
Page 4
GRIP
FRAME
AT SEAT
STAY
Roller tension knob is fully
tightened at factory and
must be loosened before
mounting bike.
RIGHT
SIDE
TIP: Test tire friction
by sharply moving
tire a 1/4 turn back
and forth. Apply
another 1/2 turn on
roller tension knob
if needed.
www.kurtkinetic.com
2
Push right tensioning knob tight against skewer, close quick release
and tighten right tensioning knob until tire is centered on roller
4
LEFT
SIDE
Tighten lock ring when wheel is centered on resistance unit and bike is
firmly locked in at the skewer
6
Attach thumb controller to handlebar. Use included shim pad
QUICK
RELEASE
SHIM PADS
SHIM PADS
TENSION KNOB
Advertisement
