Planning Your Program - Emerson White-Rodgers P210 Install Manual

6.5 Programming your thermostat
This section will help you plan your thermostat's program to meet your needs. For maximum comfort and efficiency,
keep the following guidelines in mind when planning your program:
• When heating (cooling) your building, program the temperatures to be cooler (warmer) when the building is
vacant or during periods of low activity.
• During early morning hours, the need for cooling is usually minimal.

Planning your program

Look at the factory pre-programmed times and temperatures shown in the sample schedule. If this program will suit
your needs, simply press the RUN button to begin running the factory preset program.
If you want to change the pre-programmed times and temperatures, follow these steps.
Determine the time periods and temperatures for your weekday and weekend programs. You must program
four periods for both the weekday and weekend program. However, you may use the same heating and cooling
temperatures for consecutive time periods. You can choose start times, heating temperatures, and cooling
temperatures independently for both weekday and weekend programs (for example, you may select 5:00 AM and
70° as the weekday 1st period heating start time and temperature, and also choose 7:00 AM and 76° as the
weekday 1st period cooling start time and temperature).
25