Check Your Programming - Emerson White-Rodgers P210 Install Manual

Check your programming

Follow these steps to check your thermostat programming one final time before beginning thermostat operation.
1. Move SYSTEM switch to HEAT position.
2. Press PRGM to view the 1st weekday heating period time and temperature. Each time you press PRGM, the
next heating period time and temperature will be displayed in sequence for weekday, then weekend program
periods (you may change any time or temperature during this procedure).
3. Press RUN.
4. Move SYSTEM switch to COOL position.
5. Repeat step 2 to check cooling program.
6. Move SYSTEM switch to HEAT or COOL and press RUN to begin program operation.
CONGRATULATIONS! Your new thermostat is now programmed.
32