Table of Contents
Advertisement
Cooling Example:
1. In cool, press Auto Schedule once.
2. Press
or
to select a comfortable cooling
temperature (example 75°).
3. Press Auto Schedule again. Your thermostat is now
programmed for 75° for all cooling time periods.
Your cooling program for each day of the week will look like
this:
6:30
75°
8:00
75°
5:00
75°
10:30
75°
Energy Saving Factory Pre-Program
The 1F95-1291 thermostats are programmed with the energy saving settings shown in the table below for all days of the week.
If this program suits your needs, simply set the thermostat clock and press the RUN key.
The table below shows the factory set heating and cooling schedule for all days of the week.
Heating Program
Cooling Program
* You can eliminate these two program periods in the configuration menu (reference #5) if the building is occupied all day.
Day period will change to 6:00 AM and 70° and can be programmed as required.
Planning Your Program – Important
The Heating and Cooling Program schedules below allow you to pencil in your own program times and temperatures.
The 1F97-1277 comes configured for 7 day programming and can also be configured for 5+1+1 programming (see configura-
tion section).
Factory settings are listed on Monday, Saturday and Sunday. If you are re-programming a 5+1+1 day schedule, pencil in your
own times and temperatures directly below the factory times and temperatures.
If you are re-programming a 7 day schedule, fill in all lines with the times and temperatures you want.
Keep the following guidelines in mind when planning your program.
• In Heating, lower temperatures will save energy.
• In Cooling, higher temperatures will save energy.
• If you plan on using Auto Changeover, do not program the heating temperature higher than the cooling temperature.
* Wake Up
Leave For Work
(Morning)
6:00 AM
70°F
8:00 AM
6:00 AM
75°F
8:00 AM
Programmable Fan Option
In the Set Schedule mode, the Fan key is used to select the
fan operation during a program period. The default state of
the Fan key is FAN Auto (fan runs during a call for cool but
not on a call for heat). It can be changed to FAN Prog (fan
runs during a program period). Each press of the FAN key will
change the mode of the fan between Auto and Prog.
In the Run mode, when a program period that has FAN Prog
begins, the fan will turn on and stay on during the complete
period. The display will show FAN On Prog. Pressing the FAN
key will change FAN On Prog to On (fan running continuous-
ly) or Auto. To return to FAN On Prog, press Run Schedule.
* Return Home
(Day)
(Evening)
62°F
5:00 PM
83°F
5:00 PM
PROGRAMMING
Go To Bed
(Night)
70°F
10:00 PM
62°F
75°F
10:00 PM
78°F
11
Hide quick links:
Advertisement
Table of Contents
