Setup - Toro power max 926 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
9
Description
Handle bolts
Curved washers
Locknuts
No parts required
No parts required
Carriage bolts
Locknuts
Cable tie
No parts required
No parts required
No parts required
No parts required
Qty.
4
4 Install the upper handle.
4
–
Install the wheel clutch cable ends
–
Install the traction control linkage.
2
Install the chute control rod.
2
1 Connect the wire to the headlight.
–
Fill the engine with oil.
–
Check the tire pressure.
–
Check the skids and scraper.
–
Check the operation of the traction drive.
7
Use