Setup - Toro Power Max Heavy Duty 1028 OXE Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
9
Description
Handle bolt
Curved washer
Locknut
No parts required
No parts required
Carriage bolt
Locknut
Cable tie
No parts required
No parts required
No parts required
No parts required
Qty.
4
4 Install the upper handle.
4
–
Install the wheel-clutch-cable ends.
–
Install the traction-control linkage.
2
Install the chute-control rod.
2
1 Connect the wire to the headlight.
–
Check the engine-oil level.
–
Check the tire pressure.
–
Check the skids and scraper.
–
Check the operation of the traction drive.
5
Use