Sound Pressure; Sound Power; Vibration; Safety And Instructional Decals - Toro power max 926 Operator's Manual

Sound Pressure

This machine has a sound pressure level at the operator's left
ear of 87.5 dBA (models 38820 and 38822) and 87.3 dBA
(model 38824), and a sound pressure level at the operator's
right ear of 86.6 dBA (models 38820 and 38822) and 85.7 dBA
(model 38824). The sound pressure level was determined
according to the procedures outlined in EN ISO 11201.

Sound Power

This machine has a guaranteed sound power level of 103
dBA (models 38820 and 38822) and 105 dBA (model 38824).
The sound power level was determined according to the
procedures outlined in EN ISO 3744.

Vibration

Measured vibration level for the left hand = 3.8 m/s
38820 and 38822) and 4.7 m/s
Measured vibration level for the right hand = 4.8 m/s
(models 38820 and 38822) and 5.6 m/s
The measured values were determined according to the
procedures outlined in EN ISO 20643.
Safety and Instructional
Decals
Important: Safety and instruction decals are located
near areas of potential danger. Replace damaged decals.
Reorder part no. 112-6633
1. Fast
2. Forward speeds
2 (model 38824).
2 (model 38824).
106-4525
3. Slow
4. Reverse speeds
1. Cutting dismemberment, impeller and cutting
dismemberment, auger hazards—keep bystanders a safe
distance from the snowthrower.
2 (models
2
1. Cutting/dismemberment hazard, impeller—do not place
your hand in the chute; stop the engine before leaving the
operator's position, use the tool to clear the chute.
5
107-3040
112-6625
Reorder part no. 112-6629