Intel ® Rapid Storage Technology Enterprise Sata Option Rom Utility - Asus P10S-M WS Series Instruction Manual

5.2 Intel Rapid Storage Technology enterprise SATA
®
Option ROM Utility
The Intel Rapid Storage Technology enterprise SATA Option ROM utility allows you to create
®
RAID 0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set from Serial ATA hard disk drives that
are connected to the Serial ATA connectors supported by the Southbridge.
Before you proceed, ensure that you have installed the Serial ATA hard disk drives, and have
set the correct SATA mode in the BIOS setup. You can refer to sections 5.1.2 Installing hard
disk drives and 5.1.3 Setting the RAID mode in BIOS for more information.
To launch the Intel Rapid Storage Technology enterprise SATA Option ROM utility:
®
1. Turn on the system.
2. During POST, press <Ctrl>+<I> to display the utility main menu.
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023
Copyright(C) 2003-12 Intel Corporation.
1. Create RAID Volume
2. Delete RAID Volume
RAID Volumes:
None defined.
Physical Disks:
ID Drive Model
0 ST3300656SS
1 ST3300656SS
2 ST3300656SS
3 ST3300656SS
[ ]-Select
The navigation keys at the bottom of the screen allow you to move through the menus
and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and may not exactly
match the items on your screen.
ASUS P10S-M WS Series
[ MAIN MENU ]
3. Reset Disks to Non-RAID
4. Exit
[ DISK/VOLUME INFORMATION]
Serial # Size
HWAS0000991753TR 279.3GB
37VN00009846RAJ1 279.3GB
397600009846UEDY 279.3GB
GWC50000991756G6 279.3GB
[ESC]-Exit
All Rights Reserved.
Type/Status(Vol ID)
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
[ENTER]-Select Menu
5-3