Key Combinations - Panasonic Toughbook CF-50 Series Reference Manual

Key Combinations

CAUTION
Do not press the following key combinations repeatedly in (quick) succession.
Do not press the following key combinations while using the touch pad (mouse) or other keys.
NOTE
The key combinations below may not work while some applications are running in high priority.
After you log on to Windows, it will take some time until the key combinations will be operable.
The popup window may not be displayed depending on the state of the application you are using (e.g., when
[Command Prompt] screen is set to "Full Screen").
Key Functions
1 LCD brightness
*
Fn + F1
control ( down)
1
*
LCD brightness
Fn + F2
control ( up)
2
*
Display change
Fn + F3
Speaker on/off
Fn + F4
switch
Volume control
Fn + F5
( down)
Fn + F6
Volume control
( up)
Power off using
Fn + F7
the standby func-
tion
R e m a i n i n g c a -
Fn + F9
pacity of the bat-
tery pack
Power off using
Fn + F10
the hibernation
function
1
* Operable even before you log on to Windows, but popup windows will not be displayed.
* 2 Operable even before you log on to Windows.
Function Descriptions
Pressing this key combination adjusts the brightness of LCD.
The brightness setting is stored in memory separately un-
der the condition the AC adaptor is connected and under
the condition the AC adaptor is not connected.
By pressing this key combination, you can select either
an external display, LCD or simultaneous.(
Pressing this key combination turns on/off audio from the
internal speakers and headphone jack.
NOTE
Disabling the speakers will also disable the warning
beep.
Pressing this key combination adjusts the volume of the
internal speakers and headphone jack.
NOTE
This key combination cannot be used to adjust the
volume of the warning beep or speakers connected
to the USB port.
Pressing this key combination causes the current status
of the computer to be saved to memory, and powers off
the computer. ( page 8)
Pressing this key combination displays the remaining bat-
tery capacity on the screen. (
Pressing this key combination causes the current status
of the computer to be saved to the hard disk, and powers
off the computer. ( page
page 33)
page 19)
8)
3
Popup Window
(Displayed after log-
ging on to Windows)
OFF
(MUTE)
ON
Remaining
capacity (%)
display
Battery pack is
not inserted.