Setup Utility - Panasonic Toughbook CF-50 Series Reference Manual

Personal computer

Hide thumbs Also See for Toughbook CF-50 Series:

Table of Contents

Setup Utility

Running the Setup Utility

Key Operations

Turn on or restart the computer

Press F2 while [Press F2 to enter SETUP] is displayed soon

after the computer begins the startup procedure

(If you fail to press F2 at this time, restart your computer.)

If [Enter Password] is displayed, enter your password.

When a User Password is entered, some contents cannot be changed (

NOTE

If you fail to press F2 at the right moment, the Setup Utility will not start up. In

this case, power off the computer and try again.

To close the Setup Utility, press Esc , select the exiting method in [Exit] menu,

then press Enter .

To display the corresponding "help" file.

Esc

To display [Exit] menu.

To move among the items.

To move among the menus.

To move among the values.

Enter

To display sub-menu of each item selected by

To set default settings (except the password).

(When starting up the Setup Utility with the User Password, this key

is not available.)

F10

To save the settings and exit.

NOTE

When setting date and time, Tab can be used to move the cursor.

page

12).

Table of Contents