Fuji Xerox DocuPrint M228 b Quick Setup Manual

DocuPrint M228 b / DocuPrint M228 db / DocuPrint M228 fb /
DocuPrint M228 z / DocuPrint M268 dw / DocuPrint M268 z
ME7183E3-1 (Edition 1)
Quick Setup Guide
October 2014
Copyright © 2014 by Fuji Xerox Co., Ltd.
Fuji Xerox Co., Ltd.
Unpack the machine and check the components
A
Drum Unit
(Pre-installed)
B
(For DocuPrint M228 fb / Inbox Toner
DocuPrint M228 z /
Cartridge
DocuPrint M268 z)
1
Remove the packing materials and install the toner cartridge
2

Load paper in the paper tray

3

Connect the power cord and turn on the machine

4 Configure the machine for faxing (for DocuPrint M228 fb / DocuPrint M228 z / DocuPrint M268 z)
If you do not plan to use the fax feature on this machine, go to step 5.
NOTE:
• To complete fax setup on your machine, see the Basic User's Guide.
• Your machine is programmed to automatically receive faxes. To change this default mode, see the Basic User's Guide.
Connect the telephone line cord
USB Interface Cable Quick Setup Guide
Telephone Line Cord Safety Guide
(For DocuPrint M228 fb /
DocuPrint M228 z /
DocuPrint M268 z)
Remove the orange part.
Adjust the paper guides.
Read the Safety Guide first, then read this Quick Setup Guide for the correct installation
procedure.
NOTE:
• The available connection interfaces vary depending on the model.
• The illustrations in this Quick Setup Guide are based on the DocuPrint M268 z.
CD‑ROM
• The USB cable is a standard accessory.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
Basic User's Guide
B
A
Remove the orange part.
Insert the paper with the print side face-up.
A
B
B
A