Explanation Of Symbols On The Machine - Zenoah G4500 Owner's Manual

2. Explanation of Symbols on the Machine

WARNING
• For safe operation and maintenance, symbols are carved in relief on the machine.
According to these indications, please be careful not to make any mistake.
The port to refuel "MIX GASOLINE"
Position: Fuel cap
The port to top up chain oil
Position: Oil cap
Setting the switch to the " | " position, the engine starts.
Setting the switch to the "O" position, the engine stops immediately.
Position: Rear-left of the unit
Pulling out the choke knob, the choke closes.
Position: rear-right of the on it.
The screw under the "H" stamp is The High-speed adjustment screw.
The screw under the "L" stamp is The Slow-speed adjustment screw.
The screw at the left of the "T" stamp is the Idle adjustment screw.
Position: Left side of the rear handle
The indication regarding the chain oil adjuster nut.
CHAIN OIL
"MIN" direction-the oil flow decrease
MAX MIN
"MAX" direction-the oil flow increase
Position: bottom of the clutch side
G4500
G
B
GB-5