Front Suspension; Rear Suspension - RIEJU MRX Owner's Manual

FRONT SUSPENSION

The front suspension uses the most advanced design,
Hydraulic upside-down forks.
Fork MRX/SMX
Ø 35 mm. fork tubes
Oil capacity: 245 c.c. per leg
Type oil recommended: SAE 15W/20
Fork PAIOLI MRX PRO/SMX PRO
Ø 38 mm. fork tubes
Oil capacity: 325 c.c. per leg
Type oil recommended: SAE 10W

REAR SUSPENSION

The rear suspension is made up of a rectangular steel tube
(The swinging arm) Bolted to the chassis and connected to
a hydraulic mono shock absorber through the progressive
tie rod system PRS (Progressive Racing System).
The MRX PRO/SMX PRO model is prepared with a Gas
hydraulic mono shock absorber with a separate reservoir.
Manual adjustment to the suspension pre-load is achieved
using the threaded brass rings at the base of the unit.
Threaded brass rings MRX PRO/SMX PRO
22