Acceleration; Braking - RIEJU MRX Owner's Manual

TO RIDE AWAY
Pull in the clutch lever and put the motorcycle in first gear (Down one click), slowly release the clutch lever
while at the same time accelerating slowly once moving allow the clutch lever to go its rest position (OUT)
and ride away.
Do not accelerate too much until the motor is warm enough.
CAUTION: Before riding the motor should be warm, never accelerate or ride hard when
the motor is cold. This will prevent pre-mature damage to your engine.

ACCELERATION

Riding speed and acceleration is controlled by opening or closing the throttle. Operating the twist grip
toward you increases the speed and away from decreases the engine revolutions.
TO BRAKE (SLOWING DOWN)
Close the throttle; activate the front and rear brakes simultaneously, increasing the pressure progressively.
NOTE: Sudden braking can cause skidding
20