Specifications; General Power Tool Safety Warnings; Save All Warnings And Instructions For Future Reference - Makita 9067 Instruction Manual

ENGLISH (Original Instructions)
1. Shaft lock
2. Switch trigger
3. Lock lever
4. Wheel guard
5. Bearing box
6. Screw
7. Lock nut
8. Depressed center wheel
9. Super flange

SPECIFICATIONS

Model
Depressed center wheel diameter
Max. wheel thickness
Spindle thread
No load speed (n ) / Rated speed (n)
0
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
...... Read instruction manual.
................ DOUBLE INSULATION
...... Wear safety glasses.
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
4
Explanation of general view
10. Inner flange
11. Lock nut wrench
12. Abrasive disc
13. Rubber pad
14. Wire cup brush
15. Wire wheel brush
16. Abrasive cut-off wheel/diamond
wheel
9067/9067S
180 mm
6.0 mm
M14
-1
8,500 min
458 mm
5.2 kg
END202-8
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or dark
2. Do not operate power tools in explosive
ENE048-1
3. Keep children and bystanders away while
ENF002-2
Electrical safety
4. Power tool plugs must match the outlet. Never
5. Avoid body contact with earthed or grounded
GEA005-3
6. Do not expose power tools to rain or wet
7. Do not abuse the cord. Never use the cord for
17. Wheel guard for abrasive cut-off
wheel/diamond wheel
18. Exhaust vent
19. Inhalation vent
20. Commutator
21. Insulating tip
22. Carbon brush
23. Brush holder cap
24. Screwdriver
9067L
180 mm
6.0 mm
M14
-1
6,600 min
458 mm
5.2 kg
/II
areas invite accidents.
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
operating a power tool. Distractions can cause you
to lose control.
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
conditions. Water entering a power tool will increase
the risk of electric shock.
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
9069/9069S
230 mm
6.0 mm
M14
-1
6,600 min
458 mm
5.3 kg