Am/Fm Operation - REI EVR-6500D Installation & Operation Manual

AM/FM OPERATION

1. Home button: Press to return to the HOME screen.
2. Tune DOWN button: Press to tune to lower radio frequencies.
3. Preset Memory/Recall button: Press momentarily to select the displayed preset
station. Press and hold any button to preset the current station to the button being
pressed.
4. ST/MONO button: Press to turn FM stereo reception ON/OFF.
5. LOC/DISTANCE button: Press to adjust the tuner SEEK sensitivity to select
weaker or strong station only.
6. AS/PS button: Press and hold this button for 2 seconds to auto program available
stations into the preset memory buttons. This function will erase previously
memorized stations and store the newly searched stations. Once completed, the
radio will scan for 5 seconds through each of the preset stations of either the AM
or FM band and stop. Press this button momentarily to scan only the presets.
7. SCAN button: Press this button to automatically preview all radio stations for 5
seconds.
8. AM button: Press this button to change to AM frequency. This provides access
to AM1 and AM2 presets.
9. FM button: Press this button to change to FM frequency. This provides access
to FM1, FM2, and FM3 presets.
10. SEEK button: Press this button to change the tune operation on the touch screen
to SEEK tune mode.
11. MANUAL button: Press this button to change the tune operation on the touch
screen to MANUAL tune mode.
12. Tune UP button: Press to tune to higher radio frequencies.
13. RETURN button: Press to return to the previous screen.
14. CLOCK DISPLAY: Displays the current time.
15. SOURCE indicator: This section displays the current operational mode.
Page | 16