Removable ashtray
Read and observe
on page 103 first.
Removing/inserting
›
When removing, do not hold the ashtray on the cover.
›
Pull out the ashtray in the direction of the arrow
Insertion takes place in reverse order.
Tablet holder
Introduction
This chapter contains information on the following subjects:
Attach behind the head restraint
Mount in the storage compartment in the rear armrest
Handling the holder
External devices (e.g. tablet, smartphone etc.) measuring min. 122 mm and
max. 195 mm can be secured in the holder.
The maximum permissible load of the compartment is 750 g.
CAUTION
Never exceed the maximum permissible load of the holder - there is a risk of
damage or functional impairment.
104
Using the system
Fig. 121
Removing ashtray
» Fig.
121.
104
Attach behind the head restraint
Fig. 122 Positioning the adapter/installing the holder
Fig. 123 Removing the holder/removing the adapter
105
Read and observe
105
Fitting
›
Attach the opened adapter to the guide rods of the front headrest
›
Clip in the adapter in the direction of arrow
›
Clip in the holder in the direction of arrow
Removing
›
Pull on the locking strap
›
Take out the holder out of the holder in the direction of arrow
›
Press the adapter and remove in the direction of the arrow
rods of the headrest.
WARNING
Clip in the adapter carefully - there is a risk of injuring your finger.
on page 104 first.
»
.
1
into the adapter.
2
in the direction of the arrow
A
» Fig.
122.
» Fig.
123.
3
.
4
from the guide
5