Assembly Instructions - Kärcher K 5.540 Operator's Manual

For more detailed information on

how to assemble this pressure
washer, please visit
www.karcherresidential.com/as-
sembly
Required tools
A Philips Screwdriver, medium
size (not supplied)
for final assembly
Assembly
Mount loose parts delivered with appli-
ance prior to start-up.
Install wheels and hub caps
STEP 1:

Insert the wheel into the body, rotat-
ing the wheel as you push it into
place. You should hear a click when
the wheel is completely inserted.
Then push the wheel cap into place
on the wheel, press around edges
and the center of the wheel cap to
make sure it is properly seated. You
should hear another click. Do not
proceed with the assembly until the
wheels are securely installed.
6
English

ASSEMBLY INSTRUCTIONS

Install the storage for hand-spray gun
STEP 2:

Place the bottom holder into the re-
cesses and push forward until it au-
dibly locks in.
Insert the top holder and push down
all the way.
Install the storage hook for the
mains connection cable
STEP 3:

Press in the storage hook and lock
it into the top position.
Install the transport handle
Before assembling the handle you
need to place the tubes of the deter-
gent regulator between handle and
machine body.
STEP 4:

Attach detergent hose to the fitting,
as indicated below.
Slide the transport handle into the
guide and secure it with 2 screws.