Operation; Refrigerated Cooling Zoning; Connection To Other Ducted Gas Heater Brands - Braemar SACC Series Owner's Manual

SAFETY cont.
WARNING! This appliance is not
intended for use by persons (including
children) with reduced physical,
sensory or mental capabilities, or lack
of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible for
their safety. Children should be
supervised to ensure that they do not
play with the appliance.
If the supply cord is damaged, it must
be replaced by a Seeley service agent
or similarly qualified person in order to
avoid a hazard.

OPERATION

Your Braemar Add-On Cooling Unit
has been designed and built with
reliable, quality components. To
ensure many years of trouble free,
dependable service please read the
following pages very carefully, and
please ensure that you follow all of the
instructions.
Please refer to your Braemar Ducted
Gas Heater Home Owner's Manual for
the setting and operation of your
Braemar Add-On Cooling Unit.

REFRIGERATED COOLING ZONING

TH3 Series
The TH3 Series of Braemar Ducted
Gas Heaters are not designed for
zoning, and when operated all outlets
will be open for heating. If a Braemar
Add-On Cooling Unit is connected,
then when it is operating all outlets will
be open for cooling. Accordingly, if you
choose to have a zoning control
system fitted to your TH3 Series
Heater, then because it has not been
designed for zoning, you may be
disappointed with the heating and the
cooling performance. However, any
issues will need to be referred back to
the supplier and/or installer of the
zoning control system.
CONNECTION TO OTHER DUCTED
GAS HEATER BRANDS
Although we do not recommend it, the
Braemar Add-On Cooling Unit can be
connected to the ducted gas heaters of
other manufacturers. You will need to
ensure that the ducted gas heater has
the appropriate capability and
performance, and meets the
specifications, that are required for
safe and satisfactory operation of the
Add-On Cooling Unit. You will also
need to ensure that the controller
selected in place of the Braemar
Spectrolink Comfort Control is suitable
to operate the Add-On Cooling Unit,
and is correctly programmed. Proper
installation and commissioning is
essential. Failure to comply with all of
these requirements may result in the
Add-On Cooling Unit not performing
adequately or at all, and void the
warranty.
SEELEY INTERNATIONAL – OWNER'S MANUAL 3