Technical Data - Led Lenser NEO Operating Instructions Manual

Led Lenser®*

6. Technical data

NEO
LED
Weight
Batteries
Energy tank***
Lighting modes
Luminous flux*
Burning life**
Beam distance*
Waterproof
* Luminous flux (lumen) or maximum beam distance (in meters) is measured using the setting specified in the table on switching on with a set of
fresh alkaline batteries. These are average values that may deviate by +/- 15% in individual instances in accordance with chip and batteries.
** Average burning life up to a luminous flux of 1 lumen.
*** Calculated value of the capacity in Watt hours (Wh). This applies to the fully charged batteries or battery pack(s) contained in the relevant
article in the delivered state.
EN Operating instructions NEO_V.01 | 7/31/2014
Parameter value
1 x High End Power LED
54 g (without batteries) / 80 g
3 x AAA 1.5 V, use of battery pack (NiMH) possible
5.4 Wh
Power Low Power
90 lm 20 lm
10 hours 40 hours
10 m
IPX4
Value
Flash
20 lm
100 hours
17