Firmware Upgrade; Troubleshooting; Intercom Failure; Intercom Reconnection - Sena 10c User Manual

16 FIRMWARE UPGRADE

The 10C supports firmware upgrades. You can update the firmware
using the Sena Device Manager (please refer to section 4.7.1, "Sena
Device Manager") . Please visit Sena Bluetooth website at www.sena.
com to check the latest software downloads.

17 TROUBLESHOOTING

17.1 Intercom Failure

When you try to start an intercom conversation with an intercom friend
who is unavailable within range or already having a conference
intercom with other riders or a mobile phone call, you will hear a low
tone double beep signifying an intercom busy signal. In this case, you
have to try again later.

17.2 Intercom Reconnection

If your intercom friend goes out of range while having an intercom
conversation, you may hear static noise and eventually the intercom
will be disconnected. In this case, the 10C automatically tries to
reconnect the intercom and you will hear high tone double beeps until
the intercom is reestablished. If you do not want to make a reconnection,
tap the Jog Dial to stop the attempt.
10C
59