Cleaning Your Exp 62" Plus Laminator; Specifications - D&K Group EXP 62 Plus Owner's Manual

Cleaning Your EXP 62" Plus Laminator

The laminator may be cleaned with a lint free cloth, lightly dampened with a
mild soap and water solution. Do not use spray-on cleaners. Do not immerse
any part of the laminator in water or other liquids.
Cleaning the rollers with Poly-Off Cleaners & Erasure
1. Remove Poly-Off kit from Packaging.
2. Place Latex gloves over hands for protection.
3. Pour required amount of Poly-Off to sponge and/or abrasive brush.
4. Scrub affected area until all debris has loosened.
5. Wipe clean with towel or cloth material.
6. Place Poly_Off kit back in packaging for storage.

Specifications

Capacity
Height
Width
Depth
Net Weight
Shipping Weight
Electrical
Technical Service:
There are no end user serviceable parts in a EXP 62" Plus Laminator! If the
machine does not reach temperature or you do not get the results you desire,
please contact D&K Group Inc.. Your machine is covered by a Full One-Year
Warranty as described in this manual. Contact D&K Group Inc. for warranty
and chemical related questions.
Laminator.com
EXP 62" Plus
62"
19 ¼"
80"
28"
500 lbs.
620 lbs.
230V Single Phase 30 amps
- 14 -
www.laminator.com