Table of Contents
Advertisement
5. Place the pad frame on top of the pad and tighten the screw securely.
6. Close the ADF cover by pushing it back down until it snaps back into place.
Make sure the ADF cover is completely shut without protrusion on both sides.
A
LIGNING THE
In most cases, the scanner doesn't need to be aligned but there are instances
when the alignment might be required. You need to align the scanner only if parts of
the scanned document are missing from any of its edges. For example, the heading of
a document might be missing from the top edge after the document has been scanned.
Alignment for Flatbed Scan:
1. Place a document face down on the upper left corner of the scanner glass.
2. Right click the icon
Utility from the menu that pops up.
3. The Scanner Utility window opens.
Alignment section and select Flatbed Reflective as the source.
Alignment
Source
Alignment
Window
S
CANNER
on the Windows system tray and select Scanner
31
Find the Initial Scanning Position
Alignment
Position
Advertisement
Table of Contents
