Table of Contents
Advertisement
A
LIGNING THE
In most cases, the scanner doesn't need to be aligned but there are instances
when the alignment might be required. You need to align the scanner only if parts of
the scanned document are missing from any of its edges. For example, the heading of
a document might be missing from the top edge after the document has been scanned.
Alignment for Flatbed Scan:
1. Place a document face down on the upper left corner of the scanner glass.
2. Right click the icon
Utility from the menu that pops up.
3. The Scanner Utility window opens.
Alignment section and select Flatbed Reflective as the source.
Alignment
Source
Alignment
Window
4. Click the Scan button. Part of the document image will be displayed in the
Alignment Window.
5. Click the Alignment Position buttons (Up, Down, Left, Right) until the top left
corner of the scanned document aligns with the top left corner of the Alignment
Window.
6. When the alignment completes, click on OK button to save settings and exit.
Alignment for ADF Scan:
1. Load an A4/Letter document, face up and aligned with the left side of the paper
width slider, into the ADF.
S
CANNER
on the Windows system tray and select Scanner
29
Find the Initial Scanning Position
Alignment
Position
Advertisement
Table of Contents
