Notes On Usage; Notes On Installation - Epson TM-J9000 User Manual

CAUTION:
Do not connect cables in ways other than those mentioned in this manual.
Different connections may cause equipment damage and burning.
Be sure to set this equipment on a firm, stable, horizontal surface. Product
may break or cause injury if it falls.
Do not use in locations subject to high humidity or dust levels. Excessive
humidity and dust may cause equipment damage or fire.
Do not place heavy objects on top of this product. Never stand or lean on
this product. Equipment may fall or collapse, causing breakage and
possible injury.
Take care not to injure your fingers on the manual cutter
• When you remove printed paper
• When you perform other operations such as loading/replacing roll paper
To ensure safety, unplug this product before leaving it unused for an
extended period.
Before moving the product, unplug it and unplug all cables connected to
it.
If ink leaks out of the printer, wipe up the ink with a cloth or similar material
immediately and contact your dealer or a Seiko Epson service center for
advice.

Notes on Usage

❏ When using the printer, do not open the covers.
❏ Protect the printer from impact.
❏ Do not apply excessive force to the printer case.
❏ Do not place food or beverages such as coffee on the printer case.

Notes on Installation

❏ Be sure that the printer is installed horizontally.
❏ Do not install the printer in a dusty place.
❏ Install the printer away from magnetic devices.
❏ Cables or other foreign objects must not be caught on the printer.
❏ Because cards are ejected toward the back of the printer, allow at least
60 mm {2.36} behind the printer when installing it.
TM-J9000/J9100 User's Manual 3
English