Ink Cartridge Life - Epson TM-J9000 User Manual

English
6. Carefully insert a new ink cartridge from the top, and push it firmly
but gently until it clicks in place. See the picture below to make sure
the inserting direction is correct.
Color
Close the ink cartridge cover firmly until it clicks in place. The INK
7.
LED will now go off.
When you first use the printer, installing an ink cartridge begins charging
the ink supply. This operation lasts approximately one minute. (The
POWER LED flashes during this operation.)
When you replace an ink cartridge after the first time you use the printer,
the POWER LED will flash for a short time before the printer is ready to
print.
Note:
When the ink cartridge is installed for the first time, the printer uses ink to
prepare for printing.
Do not turn off the power or open any cover while the POWER LED is flashing.
This causes the printer to restart the ink charging, which wastes ink.
When the POWER LED stops flashing and stays on, the printer is ready
for printing.
Handling Used Ink Cartridges
Dispose of the used ink cartridges as industrial waste. Also, observe the
laws in your country and district for the disposal method.

Ink Cartridge Life

To make your ink cartridges last as long as possible:
❏ Do not remove an ink cartridge except when replacing it or
transporting the printer.
❏ Do not turn on or off the printer unnecessarily.
❏ Do not press the CLEANING button unless printing is faint or uneven.
Note:
Cartridge yields vary based on such factors as type of item printed, print settings,
paper type, frequency of use, and temperature.
12 TM-J9000/J9100 User's Manual
Black
(TM-J9100)