Input & Battery voltage information
3-3. Audible Alarm
Battery Mode
Low Battery
Overload
Fault
Bypass Mode
3-4. LCD display wordings index
Abbreviation
ENA
DIS
ESC
HLS
LLS
BAT
CF
EP
FA
TP
CH
3-5. UPS Setting
Parameter 1
Parameter 2
Indicates the input voltage or frequency or battery voltage.
Vac: Input voltage, Vdc: battery voltage, Hz: input frequency
Display content
Parameter 3
Sounding every 4 seconds
Sounding every second
Sounding twice every second
Continuously sounding
Sounding every 10 seconds
Meaning
Enable
Disable
Escape
High loss
Low loss
Battery
Converter
EPO
Fan
Temperature
Charger
There are three parameters to set up the
UPS.
Parameter 1: It's for program
alternatives. There are 9 programs to set
up. Refer to below table.
Parameter 2 and parameter 3 are the
setting options or values for each
program.
10