Changing The Programme After It Has Started - Beko DPU 7305 XEL User Manual

Changing the programme after it has
started
After the machine starts, you can change the selected
programme and dry your laundry in a different
programme.
1. If you want to select Extra Dry programme instead
of Iron Dry programme, press and hold the Start /
Pause / Cancel button for 3 seconds to cancel the
programme.
2. Select Extra Dry programme by turning the
Programme Selection knob.
3. Press Start / Pause / Cancel button to start the
programme.
C
You can also select a new programme by
turning the Programme Selection knob
while the machine is operating. In this
case, current programme is aborted and
the new programme information appears
on the display.
Adding / removing laundry in Pause mode
In order to add or take out laundry after the drying
programme has started:
1. Press Start / Pause / Cancel button to switch the
machine to Pause mode. Drying process will stop.
2. While in Pause mode, open the loading door, add
or take out laundry and close the loading door.
3. Press Start / Pause / Cancel button to start the
programme.
Dryer / User Manual
C
Any laundry added after the drying
process has started may cause the
clothes that are already dried in the
machine intermingle with wet clothes and
the result will be wet laundry after the
drying process is over.
You may repeat laundry adding or
C
removing process as many times as
you desire during drying. However, this
process will increase the programme time
and energy consumption since the drying
process will be interrupted repeatedly.
Therefore, it is recommended to add
laundry before the drying programme has
started.
C
If you select a new programme by turning
the Programme Selection knob while
your machine is in Pause mode, then
the current program is aborted and new
programme information is displayed.
Do not touch the inner surface of the
drum when adding or taking out laundry
while a programme is running. Surfaces
of the drum are hot.
55 / 64 EN