Undercounter Installation; Connecting To The Drain; Adjusting The Feet - Beko DPU 7305 XEL User Manual

Under counter installation
• This product can be installed under a counter if the
height of the counter is sufficient.
A
While using undercounter dryer, it should
never be operated without undercounter
installation part.
Dryer Depth
Stock number
of under-bench 2979700100
installation part
• Leave at least 3 cm of space around the sides and
the rear wall of the product when installing it under
a counter or in a cupboard.

Connecting to the drain

In products equipped with condenser unit, water
accumulates in the water tank during the drying cycle.
You should drain accumulated water after each drying
cycle.
You can directly drain accumulated water through the
water drain hose supplied with the product instead of
periodically draining the water collected in the water
tank.
42 / 64 EN
60 cm 54 cm
2973600100
Connecting the water drain hose
1. Pull hose in the product by hand in order to
disconnect it from where it is connected. Do not
use any tools to remove the hose.
2. Connect one end of the drain hose supplied
separately with the product to the connection point
from where you removed the hose of the product
in previous step.
3. Connect the other end of the drain hose directly to
the wastewater drain or to the washbasin.
A
Hose must be fixed in every type of
connection. Your house will be flooded
if the hose comes loose during water
discharge.
C
Water drain hose should be attached to a
height of maximum 80 cm.
C
Make sure that the water drain hose
is not stepped on and it is not folded
between the drain and the machine.

Adjusting the feet

In order to ensure that the product operates more
silently and vibration-free, it must stand level and
balanced on its feet. Balance the machine by adjusting
the feet.
Turn the feet to left or right until the machine stands
level and firmly.
C
Never remove the adjustable feet from
their housings.
Dryer / User Manual