Electrical Connection; Transportation Of The Product; First Use - Beko DPU 7305 XEL User Manual

Electrical connection

Connect the product to a grounded outlet protected
by a fuse complying with the values in the "Technical
specifications" table. Our company shall not be liable
for any damages that will arise when the product is
used without grounding in accordance with the local
regulations.
• Connection must comply with national regulations.
• Power cable plug must be within easy reach after
installation.
• The voltage and allowed fuse or breaker protection
are specified in the "Technical specifications"
section. If the current value of the fuse or breaker
in the house is less than 10 Amps, have a qualified
electrician install a 10 Amp fuse.
• The specified voltage must be equal to your mains
voltage.
• Do not make connections via extension cables or
multi-plugs.
• The main fuse and switches must have a contact
distance of minimum 3 mm.
B
Damaged power cable must be replaced
by the Authorized Service Agent.
B
If the product is faulty, it must not be
operated unless it is repaired! There is the
risk of electric shock!

First use

Before starting to use the product, make sure that
all preparations are made in accordance with the
instructions in sections "Important safety instructions"
and "Installation".
Dryer / User Manual

Transportation of the product

1. Unplug the product before transporting it.
2. Remove the water drain (if any) and chimney
connections.
3. Drain the water in the product completely.
A
We recommend carrying the product in
upright position. If it is not possible to
carry the machine in the upright position,
we recommend carrying it by tilting
towards the right side when looked from
the front. After the product is moved to its
new place, you should wait for 12 hours
before starting it.
43 / 64 EN