Creating A Default Configuration File - Alvarion BreezeMAX USB250 Operator's Manual

Remote Software Upgrade Via OMA-DM
When the new software is installed, the management application restarts and
sends a notification to the server confirming that the upgrade was successful -
(EXEC completed / Update successful) immediately after connecting to the WiMax
network.
If the user chooses Cancel, the existing version of the management application
will continue running and a notification is sent to the server, containing
ALERT(401) - Update installation failed code. The new firmware image remains in
C:\Program Files\WiMAXCM\oma\temp folder, but it is not installed
automatically the next time the management application is restarted.
6.2

Creating a Default Configuration File

This section explains how to create a default configuration file for automatic
configuration. When applying this file to the unit, all the parameters will
automatically be configured with the values from the file. When resetting the unit
to factory defaults - this file is reloaded, overriding any configuration changes you
may have performed on the CPE.
To create a configuration file:
Choose a CPE from which to create the default configuration file.
1
Configure the settings of the CPE as described in this manual.
2
Select the Advance tab of the Settings window and click Export. A file is
3
created and you can save it for later auto-configuration of additional CPEs.
BreezeMAX USB 250
Creating a Default Configuration File
29 Operator Manual