Configuring Engineering Settings
5.
Configuring Engineering Settings
This section describes the settings used by operators only (in addition to the
settings described in
page
9), including three tabs: "Advance", "Channel Plan", and "DM".
These settings are available for operators only (if the file Engineer.dll exists in the
installation path.
To access the Engineering pages, click Settings in the main CM window (see
Figure
5.1
Advanced Settings
The Advance tab includes settings for the WiMAX network.
BreezeMAX USB 250
Figure 15: Status - About Tab
"Settings the WiMAX Connection Manager (WCM)" on
12).
17
Advanced Settings
Operator Manual