Table of Contents
Advertisement
Installation
2.
Installation
The following section will guide you through the hardware and software
installation.
The software installs drivers on your laptop, which allow you to use the
BreezeMAX USB250 just like a regular modem.
2.1
Prerequisites
Before installation, make sure you have a computer with the following:
A minimum of 64MB available hard disk space
An available USB 2.0 slot
Windows XP, Windows 7 or Windows Vista operating system
IMPORTANT
Windows Vista and Windows 7 users must install under Administrator mode for installation to be
complete.
2.2
Installation Procedure
To install BreezeMAX USB:
Remove the plastic cap and slide the BreezeMAX USB250 into the USB port.
1
The LED indicator turns on if the device is properly inserted.
NOTE
Please ignore the "Found new hardware" message.
A new removable storage "WiMAXCM" is displayed in the Explorer (see
2
Figure
automatically. Otherwise, execute the installer manually.
BreezeMAX USB 250
2). If auto-run is enabled in your PC, the installer is executed
4
Prerequisites
Operator Manual
Advertisement
Table of Contents
