Device Management (Dm) Settings - Alvarion BreezeMAX USB250 Operator's Manual

Configuring Engineering Settings
Item Description
CAPL Scan Lists (1, 2)
Priority The priority of scan list. When
performing CAPL scan, the scan
list with lower number of priority
will be used first.
NAPID Network Access Point ID - If
"NAPID Filter for CAPL Scan" is
enabled, this setting will be used
to filter the scan results.
5.3

Device Management (DM) Settings

The DM tab includes settings for OMA-DM (Open Mobile Alliance Device
Management) client.
The following settings are available:
BreezeMAX USB 250
Table 2: Channel Plan Settings (Continued)
Default
Scan List 1: 1
Scan List 2: 2
Scan List 1: 1
Scan List 2: 2
Figure 18: Settings - DM Tab
Device Management (DM) Settings
Comments
CAPL Scan is enabled/disabled in the
Advance tab.
"NAPID Filter for CAPL Scan" is
enabled/disabled in the Advance tab.
23 Operator Manual