Using Your BreezeMAX USB250
To disconnect from the network, click the blue circle.
An Error message is displayed when the CPE does not find a base station.
Some basic information is also shown in this window, which includes:
Service: Network service provider (NSP) name. The Service parameter is hidden
if WCM cannot obtain the operator's name via NSP discovery.
Duration: Time (HH:MM:SEC) during which there is connection to WiMAX
IP Address: Address of the WiMAX server
DL Speed: Downlink speed in kbps
UL Speed: Uplink speed in kbps
Sent: Data sent in KB/MB/GB
Received: Data received in KB/MB/GB
4.5
Viewing Status Details
In addition to the basic information that appears in the main window, you can
view detailed information on the various device parameters.
BreezeMAX USB 250
Figure 12: CM Main Window: WiMAX Connected
13
Viewing Status Details
Operator Manual