Settings The Wimax Connection Manager (Wcm) - Alvarion BreezeMAX USB250 Operator's Manual

Using Your BreezeMAX USB250
4.2

Settings the WiMAX Connection Manager (WCM)

This chapter describes the general settings available for users, including basic
settings and authentication. For setting parameters available for the Operator,
refer also to
To configure general settings:
In the main WCM window click Settings. The Settings page is displayed,
1
containing the tabs available for the end-user, and also Advance, Channel
Plan and DM tabs (engineering tabs) available for the Operator only.
If engineering tabs are not enabled, perform the following:
a
b
c
NOTE
The Basic tab may contain Language selection, depending on your configuration.
BreezeMAX USB 250
"Configuring Engineering Settings" on page
Close the Setting tab if it is open.
Copy the file Engineer.dll from the release package and place it in the
installation path of the WiMAX Connection Manager. Default path is
C:\Program Files\WiMAXCM\.
In the main WCM window click Settings; the three engineering tabs
Advance, Channel Plan and DM are displayed.
Figure 8: Setting Page: Basic Tab
Settings the WiMAX Connection Manager (WCM)
9
17.
Operator Manual