Monte Carlo Fan Company 5RH52 Series Owner's Manual page 4

19
Check the motor for shipping stabi-
lizers and remove if present. Attach
blades using screws and washers
pre-installed. Tighten screws secure-
ly.
22
Connect plug from fan to switch
house plug.
25
Un-screw hex nut and rubber washer
from light fixture. Save for later.
28
Install 3 x 40 watt Candelabra bulbs.
20
Loosen 2 screws and remove 1 screw
from motor plate. Save removed
screw for use later.
23
Loosen 2 pre installed screws of light
kit plate and remove 1 screw. Save
removed screw for use later.
26
Connect white wire from fan to white
wire from light fixture. Then plug
blue wire from fan to black wire from
light fixture.
29
Attach glass to light fixture.
21
Install by twisting clockwise, add 1
screw removed step 20 to light kit
plate. Tighten the 3 screws securely.
24
Un-screw the decorative finial nut
from light fixture. Save for later.
27
Install by twisting clockwise, add 1
screw removed step 23 to light fix-
ture.Tighten the 3 screws securely.
30
Install rubber washer and hex nut to
glass to secure in place.