Rs-485 Receiver; Vga Signal Monitor - EverFocus EN320 User Manual

5.6 RS-485 Receiver

Once the PTZ device is connected, the Data Monitor is
able to capture the protocol from the controlling system
and display command data. It is helpful to debug and
maintain RS-485 communication.
Press and keys to switch Baud rate.

5.7 VGA Signal Monitor

Connect the signal via VGA connector and the video
image will be displayed on the LCD panel.
Press to bring up the sub menu. Use navigation keys
to setup image parameters for Auto Adjust, Contrast,
Brightness and Color.
6
EN320