Operation; Power On / Off; Buttons For Configuration; Cvbs Signal Monitor / Main Menu - EverFocus EN320 User Manual

5. Operation

5.1 Power ON / OFF

Switch to proper position to turn ON / OFF power. Toggle the power switch to panel side for power OFF;
the other side for power ON.

5.2 Buttons for Configuration

1. Press MODE to switch main functions among:
CVBS signal monitor

PTZ Controller

CVBS pattern generator

RS-485 receiver

2. Press in each main function to bring up the OSD sub menu. Use navigation keys to select items
and configure parameters accordingly.
Note: All parameters will be memorized automatically.

5.3 CVBS Signal Monitor / Main Menu

Connect the camera signal via BNC connector; the video
image will be displayed on the LCD panel.
Press to bring up the sub menu. The current signal
format (NTSC / PAL) will be displayed on the mode bar.
Use navigation keys to setup image parameters for
Contrast, Brightness, Color, Language, Aspect Ratio,
Mode Bar Display and Reset setting.
VGA signal monitor

AHD signal monitor

TVI signal monitor

4
EN320