English
Show Test Modes? – uses for calibration and tests. To use the
Test Modes:
On the Right display is shown "LOAD".
Use the Right Button to confirm the selection.
On the Right display is shown "DONE"
Note: After the device has been restarted the P099 is "LOAD".
View Software Version Info – used for viewing the software
versions for user interface.
To read the software version:
In Advanced Menu select P103.
Confirm the selection, push the right button.
The blinking "UI" inscription appears on the left display and
on the right the software version.
Note: P103 is a diagnostic parameter, to read only.
14
English