Table of Contents
Advertisement
If no stand-alone mode is stored, and the device is not
connected, the red OVD led (1) is blinking.
When this occurs, the only thing you can do is connect
Orfesuz206 to a host computer and start a remote session (see
next case below). Stand-alone modes can be stored or deleted
within the control application while the unit is running a
remote session.
If no stand-alone mode is stored, and Orfeusz is connected to
a powered computer, the green led HOST (3) is blinking to
inform you that the device is ready for a remote session.
To start a remote session, you need to launch Orfeusz
companion application and select the Connect item from the
File submenu. As soon as you start the remote session, HOST
led will light on and stop blinking.
If modes #2 and #3 for example were stored, and the device is
physically connected to a powered computer, green led
HOST, and orange leds MODE #2 and MODE #3 (3) are
blinking. At this point you can either start a remote session, or
select one of the two available stand-alone modes by pressing
the pushbutton (2).
If you press the pushbutton once, led MODE #2 will light on
and stop blinking, meanwhile leds HOST and MODE #3 will
keep on blinking 3 times. When these leds stop blinking,
settings corresponding to stand-alone mode #2 are recalled
from memory, and the device starts operating in this mode.
While the latter leds are still blinking, you can press the
pushbutton again to select stand-alone mode #3.
If you press the pushbutton once again, you will get back to
the original situation, where Orfeusz awaits that you either
connect for a remote session, or select a stand-alone mode
among the ones available.
If the device is not physically connected, or if it is connected
but the PC is not powered, and (for example) stand-alone
modes #1 and #2 are available, orange leds MODE #1 and
MODE #2 are blinking.
Press once to select mode #1, or twice to select mode #2.
After a short while, the led of the selected mode will light on
without blinking, and the other led will turn off. At this
moment, the device starts operating in the selected mode.
____________________________________________________________________________________
Wrocław Audio Force
ovd
ovd
ovd
ovd
ovd
ovd
ovd
5
#1
host
#3
#1
host
#3
#1
host
#3
#1
host
#3
#1
host
#3
#1
host
#3
#1
host
#3
ORFEUSZ206
user manual
#2
#2
#2
#2
#2
#2
#2
Advertisement
Table of Contents
