Table of Contents
Advertisement
Effects
Additionally to an EQ section, each input channel includes an effect section comprising flanger, vibrato
and chorus. Only one effect per channel can be turned on at a time.
Click here to link effects on both channels
When effects are stereo linked, settings from channel 1 are transferred to channel 2, and oscillators run
in phase or in quadrature, depending on which effect is running.
Bypass switches are clickless: you can turn effects on and off anytime. Use the Level knob to
align output levels when effects are on and off.
Each effect is equipped with a clipping led.
For negative Feedback, an option called Strong Flange is available for flanger. When this option
is selected, the flanger will produce an intense effect sound.
Effects can be mapped to trajectories (see Spatial Effects).
Spatial Effects
Spatial Effects are not effects by themselves, but rather a new way of coupling effect parameters to
source trajectories. Indeed, when Spatial Effects are turned on, traditional effect parameters are
continually updated while sources are moving, according to laws that you accurately tuned.
Spatial Effects may be applied to both channels, one effect at a time, and to following parameters as
summarized in the table below.
EQ
Central frequency
Gain
Quality factor
These latter parameters can be coupled to source azimuth, distance or speed, always relative to listener.
____________________________________________________________________________________
Wrocław Audio Force
Flanger
Vibrato
Rate
Delay
Mix
21
Chorus
Rate
Delay
Depth
Mix
ORFEUSZ206
Rate
Mix
user manual
Advertisement
Table of Contents
