Table of Contents
Advertisement
Monitor
Joystick configuration
Joystick Options window is accessible from the main menu (Settings → Joystick Options...). Up to three
joysticks can be connected to Orfeusz206 to control individually all three objects movement – but you
can also use one single joystick and configure buttons to toggle control between objects. Joysticks may
be of ancient D-connector type, or equipped with a USB connector.
Although you may use mouse and even keyboard to control objects movement, we recommend the use
of joystick for a smooth and realistic trajectory. Indeed, with mouse you may achieve accelerations not
feasible in the real world, and hence produce unrealistic sound output (a public speaker traveling 20
meters in a fraction of second, with abrupt acceleration and stop, would not sound natural even in the
real world...), meanwhile object control with joystick is based on a motion and friction forces model
ensuring smooth trajectory.
____________________________________________________________________________________
Wrocław Audio Force
Monitor window displays the amount of processing power currently in
use. CPU designates the PC processor, and the graph bar shows the
total amount of processing power, including Orfeusz206 control
application and all other services in use.
DSP designates the external unit digital signal processor load.
Select the Joystick tab corresponding to the
peripheral you want to configure (this may be
Joystick 1, Joystick 2 or Joystick 3).
In the Device combo box, associate one of your
peripherals to the joystick being configured.
Assign an object to your peripheral in the Object
combo box. By default, the joystick will control
the designated object.
Adjust joystick control over object's dynamics
by setting Acceleration and Friction sliders.
You can further assign functions to joystick
buttons. In the Actions section, select which
button you wish to configure in the left-hand
combo box, and assign an action in the right-
hand one. The table on next page summarizes all
the actions available for joystick buttons.
When you are finished configuring all your
joysticks, click OK to return to the main
interface.
Hint 1: When adjusting joystick settings, click
Apply and test. Click OK to return to the main
window, or change settings again until you are
satisfied.
Hint 2: You can assign multiple actions to a
single button. For example, you might want that
one button triggers a trajectory AND turns effect
on. To achieve this, select twice the same button
in the left-hand combo boxes, and assign actions
in the right-hand ones.
30
ORFEUSZ206
user manual
Advertisement
Table of Contents
