Table of Contents
Advertisement
MIDI Control and MTC synchronization
Orfeusz206 may be controlled and synchronized by MIDI messages. A MIDI configuration window is
available in the main menu.
The second tab, named Sync, is dedicated to
synchronization.
The edit box on top allows inputting an offset.
Underneath, the application shows the current
incoming MTC time, as well as the timecode
framerate.
Pressing one of the MIDI buttons available on
the Trajectory Editor window, or on the Playlist
Manager Window, activates synchronization.
Finally, the last tab enables to associate a MIDI controller to virtually any parameter of the application
(see the full list of controllable parameters at the end of the manual).
In order to control a given parameter:
-
Press Add, and select from the structured pop-up menu the desired parameter.
-
Select the corresponding MIDI channel (CH1 to CH16) and controller number (CC0 to
CC127) thanks to the two combo boxes available on the right-hand side.
Orfeusz is moreover able to learn by itself the data identifying the controller - this feature eases the
MIDI configuration stage.
____________________________________________________________________________________
Wrocław Audio Force
The first tab allows selecting the MIDI port
receiving messages. This can be either a
physical port to which a device such as a MIDI
controller is connected, or of course a virtual
port as shown on the screenshot.
Virtual
ports
synchronize, by using MTC (Midi TimeCode),
two applications running on the same computer.
In the context of spatial audio, you will
generally sync Orfeusz and an audio or video
player.
At the present time, Orfeusz does not emit any
MIDI message. As a consequence, Orfeusz is
always the 'slave' of a 'master' application or
external hardware device.
32
are
handy
solutions
ORFEUSZ206
user manual
to
Advertisement
Table of Contents
