Table of Contents
Advertisement
We are going to show here a basic example using most of the controls. Our example is a sequence built
on 4 different parts: an intro, a part A, a part B, and an ending. We wish to achieve the following
structure:
intro
PartA
1. Press New to start a new playlist.
2. Press Add in order to add to the empty
playlist the 4 required parts. Multiple
selection in the Open dialog is obtained by
pressing the Shift or the Ctrl keyboard
key. Then, by dragging files in the playlist
manager, you can easily alter the sequence
order and get the result illustrated in the
screenshot on previous page.
3. Select file partA, right-click and select
Duplicate from the contextual menu.
Repeat this step once again, and order files
to obtain the sequence exemplified on the
screenshot opposite.
The transport section includes 2 handy controls determining how the list should be played back, as
described in the table below.
1
All
1
All
____________________________________________________________________________________
Wrocław Audio Force
PartA
PartB
Playback stops after each file. Press Play again to launch next file.
All files are played back, then player stops.
Selected file is repeated endlessly.
Whole playlist is repeated endlessly.
PartA
PartA
PartA
4. Select the 4 files forming the AABA
5. You might consider saving your
6. Hit the Play key in transport section
29
PartB
PartA
pattern (press Ctrl or Shift key to
select several files), and duplicate the
whole pattern as above. If necessary,
organize again the sequence playing
order.
playlist. Press Save and enter a
suitable filename (here Example 1).
to start playing the sequence. Keep in
mind that direct control of objects is
disabled when playing a prerecorded
trajectory.
ORFEUSZ206
ending
user manual
Advertisement
Table of Contents
